Refrigerant Knowledge Center

What Is R12 Refrigerant? Properties, Uses and Safety

R12 is a high-ODP CFC once used in domestic refrigeration, vehicle air conditioning and chillers; it has been phased out for new production in most markets under ozone-protection programs.

DesignationR12
FamilyCFC
Safety ClassA1
GWP10900
ODP1
Lifecyclelegacy

What Is R12?

R12 is a high-ODP CFC once used in domestic refrigeration, vehicle air conditioning and chillers; it has been phased out for new production in most markets under ozone-protection programs.

R12 is classified as single component in the CFC family. Its composition is 100% R12 (dichlorodifluoromethane). Refrigerant choice is never based on designation alone: capacity, pressure, lubricant, controls, heat-exchanger behavior, safety standards and local rules all matter.

R12 Technical Properties

General reference values for comparison; a current product specification and applicable regulatory basis govern a transaction.

Refrigerant designation R12
Chemical family CFC
Composition 100% R12 (dichlorodifluoromethane)
Blend type single component
ASHRAE safety class A1
100-year GWP 10900 (IPCC AR4 100-year)
Ozone depletion potential 1
Normal boiling reference -29.8 °C
GWP basis matters: different IPCC assessment reports can assign different values to the same refrigerant. Use the value specified by the regulation or procurement standard that applies to your project.

Common R12 Applications

Typical references include legacy domestic refrigeration, legacy mobile air conditioning, and legacy chillers.

Legacy Domestic Refrigeration

Use depends on equipment design, operating envelope and applicable local requirements.

Legacy Mobile Air Conditioning

Use depends on equipment design, operating envelope and applicable local requirements.

Legacy Chillers

Use depends on equipment design, operating envelope and applicable local requirements.

Advantages and Limitations

Selection advantages

  • Established refrigerant designation with published reference data.
  • Application history in legacy domestic refrigeration.
  • ODP reference of 1.

Important limitations

  • A1 safety controls must be applied.
  • GWP and lifecycle status can affect long-term selection.
  • No refrigerant should be treated as a universal drop-in.

Environmental Impact and Regulation

This is a legacy, phased-out refrigerant; only narrowly defined recovered or reclaimed uses may remain under specific local rules.

R12 has an ODP reference of 1 and a stated GWP of 10900 using IPCC AR4 100-year. Regulations commonly distinguish between manufacturing or import, new equipment, servicing, recovered material and individual end uses.

Verification date: July 2026. Confirm current rules with the competent authority for the destination and equipment category before making a compliance decision.

Safety, Handling and Storage

Recovery and servicing must follow local controls for ozone-depleting substances; never vent R12 and do not substitute another refrigerant without an approved conversion plan.

The A1 classification describes toxicity and flammability groupings; it does not by itself approve a refrigerant for a particular system. Review the current safety data sheet, cylinder label, transport classification, equipment manual and local code.

R12 Alternatives and Comparisons

Candidate alternatives must be evaluated as system choices, not simple chemical substitutions.

R134a

HFC; A1 safety class; GWP 1430 on the stated IPCC AR4 100-year basis.

Read the R134a guide

R600a

hydrocarbon; A3 safety class; GWP 3 on the stated IPCC AR4 100-year basis.

Read the R600a guide

R1234yf

HFO; A2L safety class; GWP 1 on the stated IPCC AR5 100-year, manufacturer-reported basis.

Read the R1234yf guide

Legacy or information-only refrigerant: This guide does not present R12 as a current hot-selling product. Contact us to discuss a compliant alternative for the equipment and destination.

R12 Frequently Asked Questions

What is R12 made of?

100% R12 (dichlorodifluoromethane); it is categorized as single component.

What is the safety class of R12?

The published classification used in this guide is A1. Equipment approval and local safety rules still apply.

What is the GWP of R12?

The reference here is 10900 on the IPCC AR4 100-year basis. Other assessment bases may show a different number.

Can R12 replace another refrigerant directly?

No universal drop-in claim is made. Compatibility and conversion requirements must be confirmed for the exact equipment.

Where is R12 commonly used?

Typical applications include legacy domestic refrigeration, legacy mobile air conditioning, and legacy chillers, subject to equipment design and local approval.

References and Technical Sources

Source data is summarized for general education. Always use current official documents, standards and supplier-specific safety and technical data for engineering or compliance decisions.

Ask About R12 Refrigerant

Include your equipment, required quantity, destination and preferred package so the inquiry can be reviewed accurately.