refrigerants.net/ Knowledge Center
HFO Refrigerants and HFO-Based Blends
HFO molecules and HFO/HFC blends support lower-GWP equipment transitions, with A1 or A2L safety classes and operating characteristics that differ by formulation.
How to Use This Guide
This hub organizes HFO refrigerants and blends. Use it to build a shortlist, then open each refrigerant guide for composition, safety class, GWP basis, ODP, applications, alternatives and source links.
A refrigerant designation alone never confirms compatibility. Equipment approval, capacity, pressure, lubricant, component materials, controls, charge size, technician competence and destination rules must be reviewed together.
Key Selection Questions
Technical fit
What evaporating and condensing temperatures, capacity, pressure ratio, discharge temperature and heat-exchanger behavior must the system support?
Safety fit
Which toxicity, flammability, charge-limit, ventilation, detection, occupancy and technician requirements apply to the equipment location?
Environmental fit
Which GWP assessment basis, ODP rule, leakage expectation and energy-efficiency objective govern the project?
Regulatory fit
Is the decision for new equipment, servicing, conversion, manufacture, import or reclaimed material, and what is the destination jurisdiction?
Authoritative Starting Points
- US EPA refrigerant substitute resources
- refrigerants.net/ GWP guide
- refrigerants.net/ safety-class guide
Rules and published climate values can change. This page was structured in July 2026 and should be checked against the latest official source before use.
Discuss a Refrigerant Requirement
Send the refrigerant or application, quantity, packaging preference, destination and company details.